2026 John Deere - Lawn X350R 

• 21.5-hp (16.0-kW)* iTorque™ Power System
• 42-in. (107 cm) Edge™ Rear-discharge Deck
• Large capacity rear hopper easily emptied from operator seat
• 4 year/300 hour bumper-to-bumper warranty

Features May Include:

• Engine is smooth-running and reliable V-twin air-cooled design

The tractor is powered by a John Deere iTorque Power System, a combination of engine features and an exclusive hood design that provides superior lugging ability, even cooling, and durability.
 
A large 44.3 cu in. (726-cc), 21.5-hp (16-kW) engine has plenty of power and torque for superior performance. The larger, more powerful engine also allows the engine in the rear-discharge tractor to be operated at a lower 3100-rpm speed for quieter operation.

Key engine features include:

• 21.5 hp (16.0 kW)
• Large 44.3 cu in. (726-cc) displacement
• Quality features include:
  • Cast-iron cylinder liners
  • Overhead valves
  • Full-pressure lubrication
  • Replaceable oil filter
  • Dual-stage air cleaner
• V-twin design:
  • Excellent power and performance
  • Easy starts
  • Smooth operation

Flywheel alternator

A flywheel alternator provides plenty of capacity to quickly recharge the battery and power electrical equipment, such as lights or a sprayer:

• 12-amp charging capacity
• Regulated to keep the battery at full charge without risk of overcharging

Large, 3-in. (7.6-cm) diameter fuel tank filler opening makes adding fuel easy:

• Located on the left fender
• Helps eliminate spillage
• 2-U.S. gal. (7.6-L) capacity
• A low-fuel light is provided on the tractor dash to tell the operator when it is time to refuel.

• 42-in. (107-cm) Rear-Discharge Rear-Collect Mower Deck cuts clean

The innovative design of the 42-in. (107-cm) Edge™ Rear-Discharge Deck combines the best features for reliability and superior performance when mowing, collecting, and mulching grass and leaves:

• The mower deck is stamped from 11-gauge, 0.12-in. (3-mm) steel to provide smooth contours for a quality appearance and excellent performance.
• Easy to install or remove mulch plug is included as standard equipment.
  • The included AM147289 blades provide optimal collection/rear discharge and good mulching results in many conditions. For optimal mulching, AM140332 mulching blades are available.
• With no side-discharge chute, the mower can trim on either side for mowing efficiency and convenience.
  • A smaller storage area requirement is an additional benefit.
• A standard V-belt and non-timed blade design gives superior reliability and trouble-free operation.
• Offset mower blades permit blade overlap with the use of a standard V-belt drive.
  • The blades cut cleanly without contacting each other.
• Cut-height increments of 0.25 in. (0.64 cm) allow for operating the mower at the optimum cutting height.
• An Exact Adjust deck-leveling system is provided to make keeping the deck properly adjusted easy.

The mower deck is contoured and free of obstructions to ensure optimum cutting and bagging performance:

• Grass clippings flow smoothly around the deck and up the chute into the hopper.
• Clipping buildup is minimized to ensure continued high-performance and easy cleanup.
• Special discharge blades (standard equipment) have a large wing to propel grass clippings up the chute and into the hopper.
• Mower fills and packs the 8.5-bu (300-L) hopper with a large volume of grass clippings and/or leaves.

Mulch plug easily installs in place of hopper:

• A mulch plug is included with the model year 2017 and later X350R as standard equipment (serial number 20,001-).
• Mulch plug is ideal for times when collecting grass clippings and leaves is not desired. The rear hopper can be easily removed, and the mulch plug can be installed.
• Plug closes off opening on bottom of deck so material cannot enter the chute.
• The included AM147289 blades provide optimal bagging and rear discharge performance and good mulching results in many conditions.
  • For optimal mulching, AM140332 mulching blades are available.

A wash port is provided on the mower deck. It can be used to supply water to the underside of the deck so it can be easily cleaned after use:

• The wash port is designed for a hose quick-connect fitting.
• Connect the hose to the wash port and operate the mower to clean.
• Using the wash port cleans bottom of deck and chute.
• The wash port works best if used immediately after the mowing job is completed.
• Use of the wash port prevents buildup of material from affecting performance the next time the mower is used.

Optional rear deflector (BM25065) easily installs in place of hopper:

• No tools required for installation
• Deflects clippings in an even pattern behind the tractor

• Rear hopper has large capacity and is easy to empty

The innovative design of the rear hopper sets a high standard for collecting systems:

• Constructed of durable materials
• Sealed to keep dust away from the operator
• Fabric sides provide flexibility in uneven terrain

• Four-year or 300-hour bumper-to-bumper warranty is standard

An exclusive 4-year or 300-hour (whichever comes first), single-source, bumper-to-bumper warranty* is standard for all John Deere X300 Series Tractors.

• The warranty is hassle free, with both the mower and the engine covered by a single warranty.
• If the mower is sold, the remaining warranty term is transferable to a new owner.
• Premium features of X300 Series Tractors allow for this longer warranty period, with more coverage than comparable tractors.